Nail gun accidents are one of the most common struck-by flying object hazards. Workers should steer clear of the line of sight when a nail gun is being used. This includes workers who might be working on the opposite side of a wall of plywood or sheetrock.

What are the struck by hazards?

NOTES: According to OSHA, “Struck” is defined as: injuries produced by forcible contact or impact between the injured person and an object or piece of equipment. Struck-by hazards in construction cause accidents such as the following: A construction worker was hoisting bricks in a bucket to the top of a building.

Which of the following describes a struck by flying object accident?

A Struck by flying object hazard exists when something has been thrown, hurled, or is being propelled through space. It can include instances when a piece of material separates from a tool, machine or other equipment, striking a worker, resulting in injuries or fatality.

Which of the following is a fall hazard?

A fall hazard is anything in the workplace that could cause an unintended loss of balance or bodily support and result in a fall. Fall hazards cause accidents such as the following: A worker walking near the edge of a loading dock falls to the lower level. A worker falls while climbing a defective ladder.

What are the four hazards?

These presentations focus on the Big Four Construction Hazards – falls, electrocution, caught-in and struck-by.

Struck-By Hazards: One of Construction's Fatal Four

What are the 4 high hazard areas?

What makes up OSHA's focus four highest risk hazards are falling, electrocution, getting hit by an object, and getting caught between objects.

What are four common types of struck-by hazards?

There are four common struck-by hazards in construction: struck-by flying objects, struck-by falling objects, struck-by swinging objects and struck-by rolling objects.

Is ergonomic a hazard?

Ergonomic hazards are physical factors in the environment that may cause musculoskeletal injuries.

What is a hazard in using scaffolding?

Building scaffolding for work projects can present numerous serious hazards to employees. According to OSHA, injuries related to scaffolds include falls, tip-overs, being struck by falling equipment, and coming into contact with energized power lines. ... Plumb and level the scaffold as you go.

What is a hazard for you?

A hazard is a source or a situation with the potential for harm in terms of human injury or ill-health, damage to property, damage to the environment, or a combination of these.

What is a swing radius hazard called?

1926.1424(a) Swing radius hazards. 1926.1424(a)(1)

What are the major types of caught in and caught between hazards in construction?

Types of Caught-in or -between Hazards

unprotected excavations and trenches; heavy equipment that tips over, collapsing walls during demolition; and. working between moving materials and immovable structures, vehicles, or equipment.

How can you prevent being struck by an object?

Use personal protective equipment to prevent being hit by falling or flying objects. Wear a hard hat, safety glasses, goggles, and face shields. Wear hearing protection when needed.

What is a caught in Hazard?

According to OSHA, caught-in or - between hazards are defined as: Injuries resulting from a person being squeezed, caught, crushed, pinched, or compressed between two or more objects, or between parts of an object.

What is struck by?

informal. : to be very impressed by or pleased with (something or someone) Visitors are always struck by the beauty of the landscape.

What can cause a caught between hazard?

Caught-in/between hazards are caused when a worker is compressed between or gets caught in equipment or objects. It also includes when a worker is killed by getting caught, struck or crushed from materials, equipment or a collapsing structure.

How do you control hazards on scaffolding?

1. Scaffold must be equipped with a guardrail system including top rails, mid rails, and toe boards when over 10' high, unless other fall protection method is used. ...
2. Scaffold platforms must be tightly planked with scaffold plank grade material or equivalent.

What are the hazards of mobile scaffolding?

• Falls from the work platform.
• Objects falling from the platform.
• Collapse of the structure.
• Overturn (toppling) of the structure.
• Unintended movement of the wheels.
• Contact with live overheads.

What are the main ergonomic hazards in a workplace?

Ergonomic risk factors are workplace situations that cause wear and tear on the body and can cause injury. These include repetition, awkward posture, forceful motion, stationary position, direct pressure, vibration, extreme temperature, noise, and work stress.

What is the main idea of ergonomic hazard?

Ergonomic hazards are physical conditions that may pose risk of injury to the musculoskeletal system, such as the muscles or ligaments of the lower back, tendons or nerves of the hands/wrists, or bones surrounding the knees, resulting in a musculoskeletal disorder (MSD).

What are the 5 types of hazards?

• Biological Hazards.
• Chemical Hazards.
• Physical Hazards.
• Safety Hazards.
• Ergonomic Hazards.
• Psychosocial Hazards.

What are the most common electrical hazards?

• Outdated or poor wiring. ...
• Leaving appliances plugged-in near water sources. ...
• Wrong wattage light bulbs. ...
• Overloaded power strips and outlets. ...
• Unprotected electrical outlets. ...
• Improper use of extension cords. ...
• Operating an unsafe appliance.

What is a compression hazard?

Compression (pinching/crushing/roll-over)—Examples: Working with or around moving equipment, or parts. Exposure to falling objects. Use of heavy equipment or tools that could cause compression injuries, etc. Thermal (Hot/Cold)—Examples: Operating furnaces, pouring and casting hot metal, welding.

Who is responsible for providing PPE?

Regulation 4 states: Every employer shall ensure that suitable personal protective equipment is provided to his employees who may be exposed to a risk to their health or safety while at work except where and to the extent that such risk has been adequately controlled by other means which are equally or more effective.